Features:
Use with:
How to use:Hold the Needle Ease with the black set screw facing up. Pull back on the sleeve/collar with one hand. With your other hand, slide your new needle down into the slot at the tip of the tool, about half-way.* Release the sleeve and slowly rotate the new needle until you hear or feel a “click.” Once you do, your new needle is now facing forward and you can install the needle into your machine.* To release the Needle Ease, pull back on the sleeve and slide it off of the needle.
*Barudan owners: Be sure the needle is pushed all the way down in the pin holder, to the bottom of the round shank at the top of the needle. The tool was invented on Barudan. It’s a tight fit.
Helpful Hint: Hold pressure with your thumb on the shank of the needle to hold it against the side of the slot as you spin the needle.
[ITEMPRICE]